TWO YEARS FREE UPDATE. Bi-directional Control Scanner.
Foxwell Tool: GT60 Plus Bi-directional Android Touchscreen Tablet for Comprehensive Car Diagnostics and Maintenance.
Compared to other Foxwell products, GT60 plus has a broader range of features, including diagnosis, service and repair functions, key coding, Wi-Fi connectivity, touch screen, sleek tablet-like design and so much more.
As a great performer when it comes to diagnostics, it covers a wide variety of vehicles, including OBD1 and OBD2 models.
The rugged construction, combined with the 32GB memory that stores vehicle data, makes it perfect for mechanical work. And while looks may not count for much, it is, in fact, an eye-catchy device for professional mechanics who own an auto shop.
Overall Problem Detection-- GT60 Plus All Controlled Modules Diagnostics for All Makes
Automotive All Controlled Modules Scanning and Problem Diagnostics
Foxwell GT60 touchscreen tablet is a full system diagnostic scanner that can quickly test every system module status within a few minutes. It only takes a few minutes to finish full scanning of your vehicle and do a fast diagnosis and maintenance via reading/clearing codes, viewing freeze frame and graphing live data.
All Controlled Modules Scanning and Problem Diagnostics, such as Engine System, Airbags System, ABS System, Transmission System, Brake System, Alarm System, Keyless Entry System, TPMS System, Steering System, Wheel System, Fuel System, and any other systems in your vehicle that is controlled by the car computer.
Top-End Function-- GT60 Plus Bi-directional Control for All Makes
Powerful Service Functions for Car Repair Maintenance
The POWERFUL service functions include not only all system sensors adaptation, actuation, relearn and resets, but common service maintenance functions (which may vary on different makes and models).
To list some:
Oil Light Reset:
This function is required when you are alerted that your vehicle is due for a service. It allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
This function is required for maintenance of electronic braking system's safety and efficiency. It allows you to perform the service and maintenance of brake systems, including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement on vehicles where electronic brake systems are fitted.
Also called TBA, throttle body alignment. Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA).
Tire Pressure Monitoring System Programming. The service allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.
Battery Reset. The function lets you to validate new battery, clear faults from the dashboard and display current battery details of the vehicle such as Audi, BMW, Citroen, Peugeot, Seat, Skoda, Volvo, VW and Ford.
This function specially works for Diesel Particulate Filter system with DPF regeneration, lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed, the DPF light automatically goes off.
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
Continuous Variable Transmission, this function is used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced.
This function allows you to revise the date of odometer and write the original date into new odometer.
The crankshaft position sensor learns crankshaft tooth machining tolerance and save to the computer to more accurately diagnose engine misfires. If tooth learning is not performed for a car equipped with Delphi engine, the MIL turns on after the engine is started. The diagnostic device detects the DTC P1336 "tooth not learned". In this case, you must the diagnostic device to perform tooth learning for the car. After tooth learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC "tooth not learned" is present, tooth learning must be performed.
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
More Features that GT60 Plus Have for Long-Term Utilization and Better Use Experience
4-PID Live Data Graphing and Logging
One of the cool features of GT60 Plus has is Live Data Graphing. You can monitor all sensors and parameters in your car computer with 4-PID simultaneously. Besides, the crucial data can be recorded and played back for later analysis.
2-Year Free Software Updates
Compared with other similar products one the market with only one-year updates, GT60 plus have 2-year free updates. Besides, if you have special needs for certain vehicles, just let us know directly, your requirements can be possibly met.
1* OBDII Adapter, 1* Mazda 17 Pin Adapter, 1* Mitsubishi 12+16 Pin Adapter, 1* Mercedes Benz 38 Pin Adapter, 1* Nissan 14 Pin Adapter,1* Toyota 22 Pin Adapter, 1* BMW 20 Pin Adapter, 1* Toyota 17 Pin Adapter, 1* Fiat 3 Pin Adapter, 1* Audi 4 Pin Adapter, 1* GM/Daewoo 12 Pin Adapter, 1* Honda 3 Pin Adapter, 1* PSA 2 Pin Adapter, 1* Kia 20 Pin Adapter.